Our service work includes all labour and all parts – no hidden costs. All work is done by our fully trained and qualified workshop mechanics using the right tool for the job.
This service includes all labour and all parts – no hidden costs. All work is done by our fully trained and qualified workshop mechanics using the right tool for the job.
To start the service we will check how well the Side by Side starts, keeps the idle speed and is running smoothly. We check for wear and tear and any damages or faults.
We drain and inspect the engine oil, replace the oil filter and the sump washer and refill to the model specifications. We recommend (YAMALUBE) oil for all Side by Sides.
We will check the operation of the front and rear brakes and inspect the brake reservoirs for leakages and the fluid levels. We go over the final drive, drain and inspect shaft oil and set the wheel nut to the correct tightness. We check the condition of the front and rear tyre and the adjust tyre pressure.
We has check the operation of the indicators, of low and high beam, horn, the front and rear brake light switches and also the neutral light, the kill switch and side-stand switch.
We check and adjust throttle and clutch free-play. We check the overflow level and the condition of the cooling system.
We test ride your Side by Side, check idle speed, all dash functions including ABS, check smoothness of changing gears, check for oil and coolant leaks and any unusual noises.
We give you a report to let you know if anything isn’t working as it should.
*Your SIDE BY SIDE must be clean enough so we can work on it. If we can’t get the parts for your model to finish the job we let you know as soon as possible.
In addition to the service work above, a minor service covers a battery load test making sure the terminal are secure check the charge rate and record the results. All fluids will be either topped up or replaced.
In this service we also change the engine oil and replace the oil filter and we replace the sump washer.
We go over the final drive, lube and adjust the chain, check the condition of the drive sprockets. If you Side by Side is fitted with the drive shaft, we check and replace the shaft oil.
To keep you Side by Side running and operating smoothly, we lubricate the clutch cable, throttle cable, choke cable, brake lever pivot shaft, brake pedal pivot shaft, clutch lever pivot shaft, shift pedal pivot shaft, side-stand pivot shaft and the foot-peg pivot shafts
We check front and rear wheel bearings for looseness, check the steering bearings for play and roughness, check swing-arm linkage bearings for play, check rear shock absorber condition and operation and check the front fork operation.
We check and clean and re-oil the foam type filter, we also check and replace the spark plugs and complete the diagnostic as per minor service.
We connect your Side by Side to the diagnostic tool, check and clear fault codes, reset parameters, clear service reminder, clear any engine or warning lights on dash
Once completed, we give you a report to let you know if anything isn’t working as it should.
This is the big one. A major service includes all work and parts of the 1st and all the work of the minor service in addition we will inspect your engine in more detail.
The battery test includes a check of the charge rate. We perform a full diagnostic on your Side by Side and review and clear any error codes.
We check for any free play in any of the controls and adjust as needed.
We check and replace the all spark plugs, check the ignition coil lead for any damages. We will adjust and synchronise any multi cylinder carburettors and throttle bodies.
We will inspect the valves, check the valve clearances and adjust as needed.
We test ride the Side by Side and check oil and coolant and any unusual noises.
Once completed, we give you a report to let you know if anything isn’t working as it should